====== QWKLIMITS field,limit ======
		QWKLIMITS(field)
  
===== 1) The QWKLIMITS Statement =====
This statement allows the PPL programmer to modify a users QWK limits. Four fields can be modified with their statement.  
**Important note:** You **must** use GET USER AND PUTUSER with these QWK functions.  

**Example:**  

		GETUSER
		QWKLIMITS MAXMSGS,500
		PUTUSER

- Max Messages: Maximum messages allowed in a qwk packet  
  **Note:** If you specify a number higher than that contained in PCBSETUP the values in PCBSETUP will be used.
- Max Messages per Conference: Maximum messages allowed in a qwk packet per conference.  
  **Note:** If you specify a number higher than that contained in PCBSETUP the values in PCBSETUP will be used.
- Personal Attach Limit: Maximum number of bytes in attached files for the user.
- Public Attach Limit: Maximum number of bytes in attached files for the user.

Four constants have been defined to identify the FIELD value.  

| Constant       | Value | Field                        |
|:---------------|------:|:-----------------------------|
| MAXMSGS        | 0     | Max messages per qwk packet  |
| CMAXMSGS       | 1     | Max Messages per conference  |
| ATTACH_LIM_U   | 2     | Personal attach bytes limit  |
| ATTACH_LIM_P   | 3     | Public attach bytes limit    |


===== 2) The QWKLIMITS() function =====
This functions returns the values contained in the users QWK configuration. The same constants used in the QWKLIMITS statements can be used with the field parameter.  

**Example:**  

		GETUSER
		PRINTLN QWKLIMITS(MAXMSGS)