X Toggle Expert Mode
This command enables you to toggle expert mode on the system. Using subcommands you may also explicitly specify if you want expert mode or not.
Subcommands
ON | Explicitly select expert mode. |
OFF | Explicitly select non-expert or novice mode. |
Description
When this command is used with no subcommands it acts as a toggle between expert and novice modes. If expert mode is turned on, menus are not shown. In novice mode, if there is a menu, it will be displayed after each command is executed.
Examples
If you simply want to toggle expert mode then you would press X at any conference command prompt.
If you wanted to explicitly select either expert or novice mode then you would need to use one of the subcommands. For example, if you want to make sure that you are in export mode, then you would enter X OFF at any conference command prompt.